high quality sous vide ball on sale for PSA oxygen concentrators

Polypropylene Plastic Balls

Polypropene is a thermoplastic polymer used in a wide variety of applications including packaging and labeling, textiles, stationery, plastic parts and reusable containers of various types, laboratory equipment, loudspeakers, automotive components, and polymer banknotes.

Polypropylene is mostly hard and flexible, particularly when copolymerized is with ethylene. Polypropylene is economical, and can be translucent when uncolored but is not as readily made transparent as polystyrene, acrylic, or certain other plastics. It is often opaque or colored using pigments. Polypropylene has great resistance to fatigue and a melting point of 171ºC (340ºF)

Material	Polypropylene (PP)
Size	1mm-80mm
Grade	G0-G3 (±0.01-0.05mm)
Density	Around: 0.85g/cm3
Advantage	Has good resistance, chemical resistance, low density (density less than water), low water absorption, the highest melting point of the thermoplastic with excellent electrical insulator and low dielectric coefficient, often used for floating capacity requirements, withblood transfusion, level calibration indicator.
Application	PP ball is mainly used for transfusion, level calibration indicator.

POM Delrin plastic balls

POM, characterized by its high strength, hardness, and stiffness to ~40ºC., is intrinsically opaque white, but it is available in all colors. POM has a density of 1.410-1.420 g/cm³.

POM homopolymer is a semicrystalline polymer (75-85% crystalline) with a melting point of 175ºCelsius. The POM copolymer has a slightly lower melting point of 162-173ºCelsius.

Material	Delrin
Size	1mm-80mm
Grade	G0-G3 (±0.01-0.05mm)
Density	Around: 1.4g/cm3
Advantage	it is similar to nylon, but slightly harder than nylon, slightly larger than the density recommended products applied to the required low water absorption
Application	POM ball table and drawer slide device is typically used, bearings, rollers, valves, and electronic apparatus, sailing apparatus.

PA66 Nylon plastic balls

Material	PA66( Nylon)
Size	1mm-100mm
Grade	G0-G3 (±0.01-0.05mm)
Density	Around: 1.1g/cm3
Advantage	The nylon has preferably the alkali metal, to adapt to the neutral characteristics of petroleum products and all kinds of chemical products.
Application	Used in check valve, light load, the knob pull switch, low-cost, but also for better flexibility requirements, high hardness aspects

PTFE Plastic balls

Material	Teflon Balls-PTFE
Size	1mm-320mm
Grade	G0-G3 (±0.01-0.05mm)
Density	2.1–2.3 g/cm³
Advantage	Based frictionless known material having excellent chemical stability, resistance to corrosion, sealing, high lubricity non-tackiness, electrical insulation and good anti-aging Stamina. Continuous use temperature range of -180 ° C to 250 ° C. PTFE (Teflon ®), ball so excellent frictionless known to most corrosive resistant possessed electrically insulating material
Application	Particularly suitable for use in cryogenic liquids and acids under the conditions of the instrument.

People can be set assured that this product will be not subject to problems like color fading and paint flaking off. The product has been exported to more than 100 countries. The product has been regarded as a means of enhancing people's complexion, beautifying the appearance, and improving confidence. The product has been exported to more than 100 countries.

a******p

Xintao Technology sous vide ball is required to be treated with professional technique. It goes through a chemical washing process which is usually carried in iron vessels. We provide customized service for all our products,such as women's yoga wear,sports bra

e******q

Every production stage of Xintao Technology sous vide ball is carried out by advanced automatic machines, including material cutting, stamping, welding, and surface polishing. Professional after-sale service is available for our products

q******r

Xintao Technology sous vide insulation balls is produced under the high temperature and pressure condition with the specific and professional shoe materials production formula. Our yoga shorts are designed by professional designers

v******z

The manufacturing of Xintao Technology sous vide insulation balls is carried out through the following processes: metal materials preparation, turning, milling, boring, welding, marking, and assembling. The quality of our products is strictly tested and meets up with standards

h******j

The management systems and quality control of Xintao Technology sous vide insulation balls mainly rely on our highly calibrated testing scales, computerized testing reports, state-of-the-art hardness testers. Our yoga tops are superior in material and excellent in workmanship

j******w

sous vide insulation balls has accumulated many positive feedback from our clients. The color of our sports sweatshirts is pure

Mensaje del producto

*Nombre

Teléfono

*Correo electrónico

*Contenido

Enviar consulta

high quality sous vide ball on sale for PSA oxygen concentrators

PTFE Plastic balls